Факултет техничких наука у Чачку

ОСНОВНИ БИОГРАФСКИ ПОДАЦИ

Ime i prezime: dr Pavle Spasojević
Datum i mesto rodjenja: 12. septembar 1982.god., Čačak,
Diplomski rad: TMF Beograd-2006.god. (polimerno inženjerstvo)
Doktorska disertacija: TMF Beograd-2012. god.
Naslov disertacije: Modifikacija poli(metilmetakrilatnih) materijala za baze zubnih proteza diestrima itakonske kiselineNaučno zvanje: redovni profesor Tehničkog fakulteta u Čačku,

Profesionalna aktivnost:
- istraživač pripravnik (2010-2011) Inovacioni centar TMF Beograd
- istraživač saradnik (2011-2013) Inovacioni centar TMF Beograd
- naučni saradnik(2013-) Inovacioni centar TMF Beograd
- docent (2013-) TFČ.

Naučna aktivnost:

Inženjerstvo polimernih materijala

Inženjerstvo nano-materijala

Inženjerstvo bio-materijala

Održivi razvoj i bio-ekonomija
 

Članstvo u naučnim društvima: 

Srpsko hemijsko drustvo

Nagrade i priznanja:

Pet nagrada „Panta S. Tutundžić“ za izuzetan uspeh na osnovnim studijama

Nagrade Srpskog hemijskog društva za ukupan uspeh postignut tokom osnovnih studija

Publikacije:

Oko 50 naučnih i stručnih radova.
U vodećim medjunarodnim časopisima: 26 (h=4, preko 70 citata na WEB of Science)
Na medjunarodnim konferencijama: oko 20
Predavanja po pozivu (medjunarodni skupovi): 1
Recenzent u osam vodećih medjunarodnih naučnih časopisa.
Učestvovao na sedam naučno-istraživačkih projekata (dva fundamentalna i pet inovacionih projekata) finansiranih od strane Ministarstva za nauku Republike Srbije. Bio je vo]a tri inovaciona projekta.
 

Dva meseca je boravio na usavrsavanju na Univerzitetu u Rostoku, Nemačka

РАДНО И ПЕДАГОШКО ИСКУСТВО

Od 2013. godine zaposlen je kao docent na Fakultetu tehničkih nauka u Čačku za predmete Tehnički materijali, Materijali, Ekologija i Upravljanje čvrstim otpadom. 

ПУБЛИКАЦИЈЕ

M21

[1] J.D. Rusmirović, T. Radoman, E.S. Džunuzović, J.V. Džunuzović, J. Markovski, P. Spasojević, A.D. Marinković, Effect of the modified silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate, Polymer Composites, 38 (2017) 538-554.

[2] P.M. Spasojevic, V.V. Panic, M.D. Jovic, J. Markovic, C. Van Roost, I.G. Popovic, S.J. Velickovic, Biomimic hybrid polymer networks based on casein and poly(methacrylic acid). Case study: Ni2+ removal, Journal of Materials Chemistry A, 4 (2016) 1680-1693.

[3] T.S. Radoman, J.V. Džunuzović, P.M. Spasojević, M.T. Marinović-Cincović, K.B. Jeremić, I.G. Popović, E.S. Džunuzović, Preparation and properties of short oil alkyd resin/TiO2 nanocomposites based on surface modified TiO2 nanoparticles, Polymer Composites, (2016).

[4] M. Spasojević, N. Krstajić, P. Spasojević, L. Ribić-Zelenović, Modelling current efficiency in an electrochemical hypochlorite reactor, Chemical Engineering Research and Design, 93 (2015) 591-601.

[5] V.V. Panic, P.M. Spasojevic, T.S. Radoman, E.S. Dzunuzovic, I.G. Popovic, S.J. Velickovic, Methacrylic acid based polymer networks with a high content of unfunctionalized nanosilica: particle distribution, swelling, and rheological properties, Journal of Physical Chemistry C, 119 (2015) 610-622.

[6] P.M. Spasojević, V.V. Panić, J.V. Džunuzović, A.D. Marinković, A.J.J. Woortman, K. Loos, I.G. Popović, High performance alkyd resins synthesized from postconsumer PET bottles, RSC Advances, 5 (2015) 62273-62283.

[7] M. Spasojević, L. Ribić-Zelenović, A. Maričić, P. Spasojević, Structure and magnetic properties of electrodeposited Ni87.3Fe11.3W1.4 alloy, Powder Technology, 254 (2014) 439-447.

[8] M. Spasojević, N. Ćirović, L. Ribić-Zelenović, P. Spasojević, A. Maričić, Effect of deposition current density and annealing temperature on the microstructure, hardness and magnetic properties of nanostructured nickel-iron-tungsten alloys, Journal of the Electrochemical Society, 161 (2014) D463-D469.

[9] P. Spasojević, J. Jovanović, B. Adnadjevic, Unique effects of microwave heating on polymerization kinetics of poly(methyl methacrylate) composites, Materials Chemistry and Physics, 141 (2013) 882-890.

[10] M. Spasojević, A. Maričić, L. Ribić Zelenović, N. Krstajić, P. Spasojević, The kinetics of hydrogen absorption/desorption within nanostructured composite Ni79.1Co18.6Cu2.3 alloy using resistometry, Journal of Alloys and Compounds, 551 (2013) 660-666.

[11] M. Spasojević, L. Ribić-Zelenović, P. Spasojević, Microstructure of new composite electrocatalyst and its anodic behavior for chlorine and oxygen evolution, Ceramics International, 38 (2012) 5827-5833.

[12] P. Spasojević, D. Stamenković, R. Pjanović, N. Bošković-Vragolović, J. Dolić, S. Grujić, S. Veličković, Diffusion and solubility of commercial poly(methyl methacrylate) denture base material modified with dimethyl itaconate and di-n-butyl itaconate during water absorption/desorption cycles, Polymer International, 61 (2012) 1272-1278.

M22

[13] N. Ćirović, P. Spasojević, L. Ribić-Zelenović, P. Mašković, A. Maričič, M. Spasojević, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits: Part II: Effect of microstructure on hardness, electrical and magnetic properties, Science of Sintering, 48 (2016) 1-16.

[14] N. Ćirović, P. Spasojević, L. Ribić-Zelenović, P. Mašković, M. Spasojević, Synthesis, structure and properties of nickel-iron-tungsten alloy electrodeposits part I: Effect of synthesis parameters on chemical Composition, Microstructure and Morphology, Science of Sintering, 47 (2015) 347-365.

[15] P. Spasojevic, M. Zrilic, V. Panic, D. Stamenkovic, S. Seslija, S. Velickovic, The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate, International Journal of Polymer Science, 2015 (2015).

[16] O. Pešić, M. Spasojević, B. Jordović, P. Spasojević, A. Maričić, Effect of electrodeposition current density on the microstructure and magnetic properties of nickel-cobalt-molybdenum alloy powders, Science of Sintering, 46 (2014) 117-127.

[17] L. Ribić-Zelenović, M. Spasoj, N. Ćirović, P. Spasojević, A. Maričić, Effect of milling and annealing on microstructural, electrical and magnetic properties of electrodeposited Ni-11.3fe-1.4W alloy, Science of Sintering, 44 (2012) 197-210.

[18] P. Spasojević, B. Adnadević, S. Veličković, J. Jovanović, Influence of microwave heating on the polymerization kinetics and application properties of the PMMA dental materials, Journal of Applied Polymer Science, 119 (2011) 3598-3606.

[19] D. Žugić, P. Spasojević, Z. Petrović, J. Djonlagić, Semi-interpenetrating networks based on poly(N-isopropyl acrylamide) and poly(N-vinylpyrrolidone), Journal of Applied Polymer Science, 113 (2009) 1593-1603.

M23

[20] P. Spasojević, V. Panić, S. Šešlija, V. Nikolić, I.G. Popović, S. Veličković, Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties, Journal of the Serbian Chemical Society, 80 (2015) 1177-1192.

[21] M.D. Spasojević, L.J. Ribić-Zelenović, P.M. Spasojević, B.Ž. Nikolić, Current efficiency in the chlorate cell process, Journal of the Serbian Chemical Society, 79 (2014) 677-688.

[22] Z. Vuković, P. Spasojević, M. Plazinić, J. Živanić, M. Spasojević, The effect of annealing temperatures on magnetic and electric properties of electrodeposited Ni85,3Fe10,6W1,4Cu2,2alloy, Journal of Optoelectronics and Advanced Materials, 16 (2014) 985-989.

[23] A.D. Marinković, T. Radoman, E.S. Džunuzović, J.V. Džunuzović, P. Spasojević, B. Isailović, B. Bugarski, Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate), Hemijska Industrija, 67 (2013) 913-922.

[24] T.S. Radoman, J.V. Džunuzović, K.B. Jeremić, A.D. Marinković, P.M. Spasojević, I.G. Popović, E.S. Džunuzović, The influence of the size and surface modification of TiO2 nanoparticles on the rheological properties of alkyd resin, Hemijska Industrija, 67 (2013) 923-932.

[25] M.D. Spasojević, T.L. Trišović, L. Ribić-Zelenović, P.M. Spasojević, Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation, Hemijska Industrija, 67 (2013) 313-321.

[26] P.M. Spasojević, M. Zrilić, D.S. Stamenković, S.J. Veličković, The effect of accelerated aging on the mechanical properties of pmma denture base materials modified with itaconates, Hemijska Industrija, 65 (2011) 707-715.